Replace clover efi with apple uefi on windows 10 how to#
Replace clover efi with apple uefi on windows 10 mac os x#
Replace clover efi with apple uefi on windows 10 install#
Replace clover efi with apple uefi on windows 10 full#
Replace clover efi with apple uefi on windows 10 windows 10#

Replace clover efi with apple uefi on windows 10 windows 10#

…And that’s it! You should be all set! After I went through these steps, I had a single SSD booting both Windows 10 and El Capitan using the Clover bootloader.

Replace clover efi with apple uefi on windows 10 install#

Make sure you complete all of his post installation steps and install the NVidia drivers if you need to.Follow the remainder of TonyMacx86’s guide over here:.Without this, OS X will refuse to install on your HSF+ partition. Select your HFS+ partition, under File click “Enable Journaling”.

Replace clover efi with apple uefi on windows 10 mac os x#

When you boot into the Mac OS X installer, the first thing you should do is launch Disk Utility.

Once you install the Nvidia Web Drivers, this boot flag will no longer be necessary.

If you are using a Nvidia 900 series GPU like I am, you will not be able to boot into the Mac OS X installer or the operating system without using the boot flag “nv_disable=1”.

At this point, you can more or less follow TonyMacx86’s instructions, with two caveats:.

Installing El Capitan: – Plug in and boot from your Mac OS X install flashdrive created using Unibeast. Once you are finished, it is time to install OS X.

At this point, you should be taken through the standard Windows installation.

Just delete that partition and create a new one out of the unallocated space. At this point, you will notice that Windows will not install on your NTFS/FAT32 partition.

Follow the on screen instructions until you get to the drive choice.

Once you’ve set up your new partitions on your drive, you can shut down and begin the Windows installation.

This is the way I did it, it might work the other way around, but no guarantees. Make sure the the Windows partition is the first partition you create. This cannot be reformatted in OS X, so you will need to get it right the first time. The Mac partition must be formatted as HFS+. It doesn’t matter, you will be reformatting it in a few minutes. Format the Windows partition as NTFS or FAT 32. Size them to however much space you want from each operate system and label them accordingly.

Create a new GUID partition table for the drive.

Wipe out any existing partitions/partition tables from your dual boot drive.

After you select your keyboard mapping and language, GParted should take you into the GUI for the Partition Editor.

This guide is long enough, I don’t want to reinvent the wheel.

Replace clover efi with apple uefi on windows 10 how to#

There are plenty of demos online demonstrating how to use GParted.

Boot into GParted using your Live USB.

For simplicity sake, at this point, you should disconnect all of your other drives from your motherboard or disable their SATA ports in your UEFI.

This is the first version of this install guide that has switch from the Chimera method to Clover:

Use the latest version of Unibeast and your copy of El Capitan downloaded from the Mac App Store to create a OS X installation USB.

Stick with Rufus’s suggested setting for your particular Windows ISO:

Use Rufus to create a Windows installation flash drive.

Personally, I used the LinuxLive USB Creator method, but any method will work. You only need a 512MB flash drive for this.

The link below has the download and instructions for creating a GParted Live USB.

You need to create a GParted Live USB, Windows Install USB, and Mac OS X Install USB.

Copy of El Capitan downloaded from Mac App Store.

Three flash drives: One needs to be 512MB or larger, Two need to be 8GB or larger.

i7-3770K, GIGABYTE GA-Z77N-WIFI, 2x8GB 1600MHz Team Ram, 500GB Samsung 850 EVO, 2x3TB Seagate Barracudas (RAID 0), NVidia GTX 980, Silverstone 600W SFX PSU, NCase M1.

Replace clover efi with apple uefi on windows 10 full#

For full hardware specs are listed below: I can’t make any guarantees for Z170 or X99. It is very likely that this will work exactly the same for Z87 and Z97 systems as well. I was determined to go with a single drive because I have a SFF case and got an excellent deal on a 500GB Samsung 850 EVO.ĭisclaimer: This method worked on my personal Z77 (Ivy Bridge) system. If you ever want to do updates or restore a corrupted OS, two separate drives are always easier to work with. It should also be said that it would be a lot simpler in the long term to just use a separate physical drive for each operating system. If that is the case, this method isn’t for you, and you should keep looking for something that will work for you. Some people may not own three flash drives or may not want to deal with GParted. Note: First I wanted to say that this is the easiest method I found that works with my workflow. How to Dual Boot El Capitan and Windows 10 on a single SSD